“Yellow house – part 1.” by Huseyin Karaaslan
28) To create the lamps, let us draw a hexagon and then by using ´scale´ let us make the bottom part smaller.
29) Let us select the side surfaces and apply ´inset´. While doing this, let us not forget to select the ´by polygon´ option.
30) For the surfaces that we used ´inset´, let us ´extrude´ them inwards.
31) Let us shape the top and bottom parts by using ´extrude´ and ´inset´.
32) To add details to the lamp, let us attach the pieces we have drawn with ´line´.
33) As shown in the picture, let us drawn the lamp support on which the lamp is attached to with ´line´ again.
3Dtutorials.sk recommendation:
To maximise the realism of your 3D objects we recommend to use high quality photo references from the #1 texture website www.environment-textures.com
34) To draw the tree-like object in front of the house, let us use ´line´ again. Let us draw the branches with ´line´, ´attach´ them together and convert it to ´poly´ mode.
35) Let us select the branches that will have leaves on them and copy them as a separate object.
36) Let us draw a ´plane´ and cover it with leaves and by using ´scatter´, let us copy them onto the branches. For using ´scatter´, I have used the setting above.
NOTE: When using ´scatter´, if you bring your pivot even to the corner of the ´plane´, ´scatter´ will use its old pivot. That is why we place the object at point ´0´ and by choosing all polygons, we manually carry the place we desire as the pivot center to point ´0´.
Latest Comments